Request a Hardwood Installation Estimate
Tell us about the rooms, existing flooring, and solid or engineered wood product you are considering. Include photos if available.
Hardwood Installation Starts With the Existing Conditions
Solid and engineered wood products can have different requirements for the subfloor, moisture conditions, installation method, expansion space, and transitions. The correct plan starts with the product specifications and the room where it will be installed.
Westpeak reviews existing flooring, visible substrate conditions, continuity between rooms, doorway heights, baseboards, and perimeter details before preparing the installation scope.
For LVP, laminate, carpet, or a general flooring comparison, visit our flooring installation and replacement hub.
What We Evaluate Before Installation
Product and Installation Requirements
- Solid or engineered wood construction
- Product dimensions and manufacturer requirements
- Approved installation methods for the selected product
- Expansion space, room continuity, and transitions
Room and Subfloor Conditions
- Existing flooring removal and exposed substrate
- Visible unevenness, damage, or moisture concerns
- Doorway clearances and adjoining floor heights
- Baseboards, casing, trim, and perimeter finishes
A written scope should identify the selected product, preparation requirements, installation method, transitions, and connected finish work before installation begins.
Solid Hardwood and Engineered Wood
Solid Hardwood
Solid wood flooring is milled from wood through the full thickness of the plank. Product requirements, subfloor type, room conditions, and installation method must be reviewed before work begins.
The selected product may have specific requirements for acclimation, fastening, expansion space, and compatible locations.
Engineered Hardwood
Engineered wood uses a real wood wear layer over a constructed core. Installation options and suitability vary by the product, wear layer, backing, and manufacturer requirements.
We review the product specifications, room, substrate, transitions, and connected finishes before defining the scope.
Installation Method Is Product-Specific
Nail-down, glue-down, floating, or another approved method may apply depending on the product and substrate. Westpeak does not select a method from the material name alone. The product instructions and existing conditions are reviewed first.
What Can Be Included
Removal & Subfloor Review
- Removal of approved existing flooring
- Review of the exposed subfloor or slab
- Basic cleaning and preparation
- Identification of visible damage, uneven areas, or moisture concerns
- Discussion of additional preparation when needed
Installation & Finish Details
- Solid or engineered hardwood installation
- Layout, alignment, and perimeter planning
- Doorway and room transitions
- Baseboard removal or replacement
- Minor drywall, paint, or trim repairs related to the installation
- Cleanup and a final walkthrough
Subfloor Evaluation and Preparation
The subfloor must be suitable for the selected wood product and approved installation method. After removal, we evaluate the exposed surface, visible damage, uneven areas, moisture concerns, and product requirements before proceeding.
Concealed conditions can change the scope. Significant leveling, damaged subflooring, incompatible existing materials, or moisture concerns may require additional evaluation before hardwood can be installed.
Older flooring systems or adhesives may require additional evaluation before disturbance when suspect materials are present. Appropriate testing may be needed, and qualified abatement specialists may need to handle regulated-material removal or disposal.
Baseboards, Transitions & Finish Work
The edges of a flooring installation are just as important as the flooring itself.
Westpeak can remove and replace baseboards, install transitions between rooms or flooring types, and complete related trim, caulking, paint, or minor drywall repairs when included in the scope.
These details help the new flooring look complete instead of stopping short at the walls and doorways.
Hardwood Replacement and Existing Wood Floors
Hardwood floor replacement may involve removing damaged or unwanted flooring, evaluating the exposed substrate, selecting a compatible new product, and planning transitions to adjoining rooms. Matching an existing wood floor may be limited by species, dimensions, grade, finish, age, and product availability.
If the existing floor may be retained, sanding and refinishing can be evaluated separately. Visit our hardwood floor refinishing page for the conditions that determine whether an existing floor is a candidate.
What to Expect
What to Expect When You Work With Us
1. Request an Estimate or Call
Tell us about your project and include photos if available. You can submit the estimate form or call us directly. We respond within one hour.
2. Schedule a Walkthrough
We will review the project details and schedule an onsite walkthrough to inspect the work, take measurements, and confirm the scope.
3. Receive a Written Estimate
After the walkthrough, we will provide a written estimate describing the proposed scope and pricing.
Protection, Installation & Cleanup
We review access to the work area and protect nearby finished surfaces before removal and installation begin. Flooring is installed according to the approved scope and applicable product requirements.
Protection and cleanup are planned with the installation. We remove normal project debris from the property, clean the affected area, and review transitions, perimeter details, and the completed installation with you.
Hardwood Floor Installation Service Areas
Westpeak provides solid and engineered hardwood floor installation, replacement, removal, transitions, baseboard work, and related finish repairs throughout Orange County and select nearby communities.
Contact us with your project location, photos, approximate measurements, and flooring information so we can confirm availability and the next step.
Planning a Hardwood Floor Installation?
Tell us which rooms need flooring, what product you are considering, and what is currently installed. Include photos if available.
Related Services
General Flooring Installation
Hardwood, engineered wood, LVP, laminate, carpet, removal, and replacement.
Hardwood Floor Refinishing
Evaluation, sanding, preparation, staining options, and refinishing for suitable existing floors.
Carpet Installation
Carpet removal, padding, installation, transitions, and supported stair work.
Baseboard Installation
Baseboard removal, replacement, caulking, and finish work around new flooring.
Hardwood Floor Installation Questions
Do you install both solid and engineered hardwood?
Yes. Westpeak installs applicable solid and engineered wood flooring products.
The product, subfloor, room conditions, and manufacturer requirements determine the appropriate installation plan.
Do you remove existing flooring?
Yes! Existing flooring removal can be included in the project.
We will review the existing material, disposal requirements, access, and visible surface conditions before the work begins.
How do you determine the installation method?
The approved installation method depends on the selected wood product, its manufacturer requirements, and the existing substrate.
Nail-down, glue-down, floating, or another approved method is not assumed until those conditions are reviewed.
Do you install baseboards?
Yes! We can remove existing baseboards and install new baseboards as part of the flooring project.
Caulking, nail-hole filling, and related finish work can also be included in the written scope.
Can you reinstall my existing baseboards?
Existing baseboards can sometimes be reinstalled, but removal may cause damage or expose previous nail holes, caulking, or paint lines.
We will review their condition and explain whether reuse or replacement is the better option.
Can new hardwood match an existing wood floor?
Matching depends on species, dimensions, grade, finish, age, installation pattern, and product availability.
We inspect the existing floor and explain practical transition or replacement options before the scope is finalized.
Should the rooms be empty before installation?
Furniture and personal items generally need to be removed from the work area before installation begins.
We will discuss access, furniture, appliances, and preparation responsibilities during the walkthrough.
Can you install flooring throughout an occupied home?
Yes! Many flooring projects are completed in occupied homes.
We will discuss room access, furniture movement, work sequencing, dust, noise, and areas that may be temporarily unavailable.
Do you also refinish existing hardwood?
Yes. Westpeak can evaluate suitable existing wood floors for sanding and refinishing.
Refinishing is a separate service from installing new hardwood and depends on material type, remaining wear layer, damage, and prior finishing.
Can you provide an estimate from photos?
Photos and approximate measurements help us understand the project, but flooring installation generally requires an onsite walkthrough to confirm measurements and visible surface conditions.
After the walkthrough, we will provide a written estimate describing the proposed scope and pricing.